PH. 612-314-6057

How to Carve a Bone-In Turkey Breast for Perfect Slices

Post date |

Carving a whole bone-in turkey breast can seem intimidating, but with the right techniques, you’ll get beautiful, even slices perfectly suited for your Thanksgiving table or elegant dinner party. Learning how to properly remove the breastbone before slicing makes getting picture-perfect portions easy.

Why Learn This Technique?

Cooking a bone-in turkey breast is a great alternative when you don’t need a full-size bird. A breast yields plenty of meat for a smaller gathering of 4-6 people without lots of leftovers. Plus it thaws faster and cooks quicker than a whole turkey.

However, carving a bone-in breast while it’s still attached leads to uneven, shredded meat That’s why learning how to remove the breastbone first is key for presentable slices your guests will love

Tools You’ll Need

You only need a few essential tools on hand to cleanly carve a bone-in turkey breast:

  • Cutting board – Use one with a moat or well to catch juices.

  • Sharp knife – A long slicing or chef’s knife works best.

  • Carving fork – Helps steady the turkey while slicing.

  • Meat thermometer – Checks the breast is cooked to 165°F.

Step-By-Step Instructions

Follow these simple steps for foolproof results:

1. Let the Turkey Breast Rest

After baking, transfer the breast to a cutting board and tent with foil. Let rest 15-20 minutes so juices redistribute.

2. Position It Bone-Side Up

Place the breast vertically on the board with the breastbone facing you. Locate the breastbone.

3. Cut Alongside the Breastbone

Put your knife just outside the breastbone. Cut down its length, using the fork to steady it. Stay close to the bone.

4. Repeat on the Other Side

Go back to the top and slice down the opposite side of the breastbone.

5. Remove the Breastbone

You should now have two halves with the bone exposed. Detach and lift out the breastbone.

6. Slice the Turkey Breast

With the bone gone, slice each breast half crosswise against the grain into portions.

Arrange the slices neatly on a platter to serve. Pour any collected juices over the meat.

Carving Tips for Best Results

Follow these tips for picture-perfect sliced turkey breast:

  • Always let it rest before carving so juices redistribute.

  • Use a sharp, non-serrated knife for clean cuts rather than shredding.

  • Keep the turkey steady with a fork as you slice.

  • Cut closely along the breastbone for nice halves.

  • Slice 1/4 to 1/2 inch thick against the grain for even cooking later.

Get the Most from the Breastbone

Don’t throw out the breastbone after carving! Use it to make delicious homemade turkey broth:

  • Simmer it with vegetables to make turkey stock.

  • Roast it and then boil to make concentrated turkey bone broth.

  • Add to your dog’s food as a healthy source of calcium.

With tasty turkey broth on hand from the bones, you’ll have an easy cooking base for soups, stews, and more all week long.

Master Carving Bone-In Turkey Breasts

While it may seem difficult, carving a bone-in turkey breast just takes using proper technique. Tracing along the breastbone before removing allows you to achieve beautiful, juicy slices.

Use a sharp knife, take it slow, and refer back to these steps. With practice, you’ll be able to showcase carved turkey breasts at your next holiday feast or Sunday dinner for proud presentations your guests will love.

how do you carve a bone in turkey breast

Carving a Turkey Breast Off the Bone

  • 1 Select a sharp chef’s knife or serrated knife. Both a chef’s knife and serrated knife are viable options for carving a turkey breast. The only difference is the way that you cut with them. Choose a serrated knife if you prefer to saw the meat, and choose a chef’s knife if you want to slice it.[5]
    • If you choose a chef’s knife, then make sure it is very sharp before you begin to carve the breast. If not, it will be very difficult to make clean cuts. The knife should be about 8 in (20 cm) long.
    • This method will work if you separated a breast from a whole turkey, or if you cooked a bone-in breast on its own.
  • 2 Place the body of the turkey on a serving plate or cutting board. Put the whole turkey breast, breast-up, on a flat serving platter or a cutting board that is big enough to carve it on. Face the neck cavity away from you.[6]
    • It is useful if the serving platter has a rim or the cutting board has a trench to catch the turkey juices as you are carving.
  • 3 Slice along one side of the breast bone and all the way down. Pick a side and start at the top of the breast right where it meets the top of the breast bone. Slice downward and as close to the breast bone as possible to separate the meat from the bone until you can no longer cut through the meat.[7]
    • If you are using a chef’s knife, use long, even slicing strokes. If you are using a serrated knife, then use an even sawing motion to carve the breast.
  • 4 Move your knife to the front of the ribs, near the neck, and cut along them. Slice along the ribs, as close to them as possible, and down around the bottom of the breast. Keep slicing until you connect with your first cut and have freed a large chunk of the breast from the bones.[8]
    • You should feel the breast come loose when both of your cuts meet. It might even fall off! If it is still connected, use your knife to cut through any last bits that are holding it in place.
  • 5 Pull the breast meat off the bone and carve it into slices. Pull the chunk of breast meat away from the carcass and set it on the cutting board or platter. Slice it against the grain into pieces of the size you want for serving.[9]
    • You can use tongs to steady the breast while you carve it into slices. Then, youll have the tongs handy for serving as well.
    • Against the grain is more or less straight down or at a slight angle away from you.
    • If you arent sure how thick to slice the turkey, then cut it into 0.5 in (1.3 cm) slices.
  • 6 Repeat the process for the other side of the breast. Flip the breast around in front of you so you can easily carve the other side. Start the process over from the beginning to carve the other turkey breast.[10]
    • For example, if you carved the right side of the breast first, then flip the breast around so that you can carve the left side off the bone now. The neck cavity will now be facing you instead of away from you.
    • If you did it correctly, the majority of the meat should be off the bone now. You can use your fingers to clean the carcass later, and use the bones and scraps to make turkey stock or soup.
  • Advertisement

StepsPart

  • 1 Place the whole turkey on a cutting board, breast-up, with the cavity facing you. Set your turkey in front of you on a large cutting board so the legs and thighs are closest to you. Cut through any strings holding the legs together with the tip of a sharp knife.[1]
    • A sharp chef’s knife will be most useful for separating the turkey breast from everything else smoothly and easily.
    • If you cooked only a turkey breast instead of a whole turkey, then skip down to the next method!
  • 2 Remove the legs and thighs with a sharp knife. Cut through the skin between the thighs and the breast. Push down on the legs and thighs to bend them away from the breast and expose the joints. Slice through the joints with a sharp knife and set the legs and thighs aside.[2]
    • You can separate the thigh from the drumstick at this point by cutting through the joint that connects them if you want to carve up the thigh later as well.
    • The knife should be big enough to slice all the way through in 1 slice.

    Advertisement

  • 3 Pull out the wishbone with your fingers. Flip the breast around so the front is facing you (and still still breast-up). Reach into the neck cavity with your fingers, feel for the wishbone, and try to pull it out. Use the tip of your knife to help cut it free from the meat if you can’t pull it out right away.[3]
    • The wishbone is the “Y” shaped collar bone at the front of the breast. Removing the wishbone will make the turkey breast much easier to carve.
  • 4 Cut the wings off the breast. Bend a wing to the side to expose the joint that connects it to the breast, then cut through it with one clean slice. Repeat this for the other wing to finish preparing the turkey breast for carving.[4]
    • You can leave the wings intact to be eaten whole. They are the crispiest and least meaty part of a whole turkey.
  • Advertisement Part

How to Carve Turkey Breasts – It’s Easy AF!

FAQ

Do you carve a turkey breast with the grain or against?

Slice against the grain! The most important part of carving the meat is to cut it the correct way. Cutting against the grain means cutting the meat opposite of the direction that the natural muscle fibers run.

How do you carve a bone in chicken breast?

Start carving the breast by finding the breastbone in the center of the breast. The breast is where you will get most of the meat. Cut straight down, in small slicing motions, at an angle along the breast bone to remove an entire half of the breast. Set it aside and then repeat with the other side of the breast.

How do you carve a bone-in Turkey Breast?

Follow these steps to carve a bone-in turkey breast for picture-perfect presentations Sharp knife – A long slicing or chef’s knife allows smooth, even cuts. Carving fork – Helps steady the turkey when carving. Instant-read thermometer – Ensures the turkey breast is fully cooked to 165°F. 1. Let the Turkey Breast Rest

How do you cut a bone-in Turkey Breast?

With the right techniques, carving a bone-in turkey breast results in tender portions ready to serve family and guests. Tracing along the breastbone before removing it allows for even, attractive slices. Use a sharp knife, take it slow, and refer back to these steps when tackling your next bone-in turkey breast.

Can you slice a bone-in Turkey Breast?

A time-honored tradition is carving turkey breast at the dinner table but the slicing can be tricky without employing the right techniques. So we’ve tapped Sarah Brekke, M.S., Better Homes & Gardens Test Kitchen culinary specialist, to show us how to carve a bone-in turkey breast as well as boneless turkey breast meat.

How do you cook a turkey breast?

Consider using a turkey seasoning, turkey marinade, turkey brine, or turkey injection to make a flavorful and juicy turkey breast! cooked, bone-in turkey breast – you will want to use a meat thermometer to ensure the internal temperature is at least 165 degrees F after being cooked before you begin carving.

How do you cut a turkey breast with a wishbone?

The wishbone is the “Y” shaped collar bone at the front of the breast. Removing the wishbone will make the turkey breast much easier to carve. Cut the wings off the breast. Bend a wing to the side to expose the joint that connects it to the breast, then cut through it with one clean slice.

How do you get the most meat off a turkey breast?

In order to get the most meat off of a turkey breast, you need to use the proper carving technique to cleanly cut the breast meat off the bone. The right knife is as important as making the right cuts. Make sure to separate the breast from the rest of the turkey before carving if you have a whole roast turkey.

Leave a Comment