PH. 612-314-6057

Planning the Perfect Taco Salad for a Crowd

Post date |

In my kitchen, busy days often mean easy, one-pan dinners that I can assemble in a flash. You can do all of those things with a simple salad, but it still needs protein to be a full meal. That’s where my easy and healthy taco salad recipe with ground beef comes in. It’s so fresh, flavorful, and uses simple ingredients — you’re going to love it!.

Taco salad is a favorite party pleaser, mixing colorful veggies, beans, cheese and meat on a crunchy tortilla chip base. When making taco salad for a crowd, it can be tricky to know exactly how much ground beef to buy and prep to generously fill the bowls of all your guests.

In this article, I’ll provide a simple guide to calculating the right amount of ground beef per person for taco salad. You’ll also find tips for building the ultimate DIY taco salad bar everyone will love!

Figuring Out Serving Size

The first step is estimating how much taco salad each person will eat Here are some general serving size guidelines

  • Women – 1-1.5 cups
  • Men – 1.5-2 cups
  • Teens – 1.5-2 cups
  • Kids – 1 cup
  • Toddlers – 1/2 cup

These portion sizes allow for generous helpings of all the flavorful taco salad components. For big eaters, go ahead and bump servings up a bit.

Calculating Ground Beef Needed

A meaty taco salad should have about 4-6 oz of ground beef per serving.

For a 1.5 cup serving:

  • 4 oz beef = Light
  • 5 oz beef = Moderate
  • 6 oz beef = Meaty

Let’s look at a sample for a party of 10 adults and 5 kids:

  • Adults (10): 10 * 5 oz = 50 oz (3.1 lbs)
  • Kids (5): 5 * 4 oz = 20 oz (1.25 lbs)
  • Total: 70 oz (4.4 lbs)

Here’s a simple formula based on your guests:

  • Adults: Number of adults x 5 oz
  • Kids: Number of kids x 4 oz
  • Total: Combine for total lbs of ground beef needed

Always round up to allow for extra servings.

Tips for Perfectly Prepped Beef

To get the most flavor and texture from your ground beef, follow these tips:

  • Use 80/20 ground beef for balanced fat content. Avoid super lean beef.
  • Brown beef in batches over high heat, draining excess fat.
  • Season with taco seasoning or cumin, garlic powder, onion powder, paprika, salt and pepper as it browns.
  • Allow to cool slightly before adding to other ingredients to prevent wilting.

Browning the beef thoroughly gives it a delicious meaty flavor that takes the taco salad up a notch!

Building the Ultimate Taco Salad Bar

Once you’ve got the protein ready, include these essential ingredients for topping:

  • Shredded lettuce – romaine, iceberg or mix
  • Diced tomatoes and peppers
  • Shredded cheese – cheddar, Mexican blend
  • Sliced black olives
  • Sour cream
  • Guacamole
  • Salsa
  • Jalapeños
  • Tortilla chips or taco shells
  • Beans – pinto, black or refried

Provide an array of hot sauces so guests can amp up the spice level of their salad.

Serving Salad for a Crowd

When serving taco salad to a large group:

  • Use large bowls for self-serve ease.
  • Keep ingredients chilled in the fridge or cooled containers until ready to serve.
  • Place tongs in each ingredient bowl for easy grabbing.
  • Set up an assembly line so guests can customize their salads.
  • Include small plates for easy transport to tables.

Encourage guests to toss and mix their own creations for maximum flavor in each bite!

Throwing an Epic Taco Salad Party

Planning taco salad for a crowd takes a little extra strategy, but the payoff is happy guests and minimal leftovers.

Determine the portion size and ground beef needed based on your number of adults, teens and kids. Cook the beef to juicy, taco-seasoned perfection. Keep topping ingredients fresh and constantly replenished.

Add festive decor, margaritas and music, and your taco salad bar bash will be a fiesta everyone raves about for weeks! Olé!

how much ground beef per person for taco salad

Taco Salad (Healthy & Easy!)

In just 20 minutes, you can make this fresh and easy taco salad recipe with common ingredients like ground beef, lettuce, tomatoes, avocado, and cheese.

Tap underlined ingredients to see the ones I use.

Tap on the times in the instructions below to start a kitchen timer while you cook.

  • Heat oil in a skillet over high heat. Add ground beef. Break up the beef pieces with a spatula and stir-fry for 7 to 10 minutes, until the beef is browned and the water has evaporated.
  • Stir taco seasoning into the ground beef until well combined. If you want, you can add 1/4 cup of water when you add the spices and let it cook for a little while.
  • Meanwhile, combine all remaining ingredients in a large bowl. Add the ground beef. Toss everything together.

Why You’ll Love My Taco Salad Recipe

how much ground beef per person for taco salad

  • There are so many things I love about this ground beef salad: the perfectly seasoned taco meat, the sweet tomatoes, the crisp lettuce, the creamy avocado, and the cheddar cheese. There’s a reason why this salad recipe is my most-read!
  • You can find fresh, simple ingredients at any grocery store, and they are good for you. (They are also naturally low carb and gluten-free. Not only that, but the way I dress it is the easiest thing ever.
  • You can use whatever you have on hand or change the ingredients to suit your tastes.
  • You can have this taco salad ready in 20 minutes, which is one of the best things about the recipe. The only cooking that needs to be done is setting the ground beef on fire on the stove. So simple.
  • One-bowl dinner that’s quick and easy—also known as one of my favorite types of meals! No need to fuss with putting together different taco toppings for each one.

how much ground beef per person for taco salad

This section explains how to choose the best taco salad ingredients, what each one does, and substitution options. For measurements, see the recipe card below.

  • Ground Beef: For a ground beef taco salad, I like 85/15, but you can use any kind you like. You can use ground turkey, ground chicken, chorizo, or shredded chicken instead of beef if you don’t like beef or don’t have any on hand. And I’ve made this recipe before with barbacoa instead of taco seasoning; just leave out the powder.
  • Avocado Oil – Just a bit for browning the beef. Olive oil works fine as well.
  • Taco Seasoning—I like to make my own taco seasoning and put 2 tablespoons of it on every pound of meat. This dish is easy to make and only takes 5 minutes. You’ll need chili powder, cumin, salt, pepper, smoked paprika, dried oregano, garlic powder, onion powder, and cayenne pepper. However, taco seasoning from the store saves time and is more convenient. Check labels to avoid fillers and sugar if you can. If your seasoning isn’t salted, you’ll need to add 1 teaspoon of salt. I like this store-bought seasoning, but it doesn’t have any salt in it.
  • Romaine Lettuce: I like to use romaine lettuce for taco salad recipes, but you can use any kind of greens you like. Another classic choice is iceberg lettuce. If you want to try something new, you could use kale, arugula, or spinach instead.
  • Grape Tomatoes – Served halved in the salad. I’ve also made this salad with Roma tomatoes or cherry tomatoes that have been chopped up. Pico de gallo also works well.
  • Cheese Shreds: I like to use cheddar cheese, but you can also use a Mexican cheese blend or pepper jack if you like things spicy. You can omit if you want to avoid dairy.
  • Avocado—You need avocado in a healthy taco salad, but you can use guacamole instead if you’d rather.
  • Onions: I like green onions, but you can use any kind you like. You can use either diced red onions (the traditional choice) or white onions. Not a fan of onions? You could also add some fresh cilantro leaves instead.
  • If you want to be creative without making things more difficult, try making different kinds of salsa. This one is already made and has medium heat and clean ingredients. If you want something mild, use mild salsa. If you want something spicy, use spicy salsa. If you want something different, try green chile or peach salsa. You can make your own too. Here are some recipes for simple fresh tomato salsa, green salsa verde, and creamy avocado salsa verde.
  • Sour Cream—Instead of a dressing, I use salsa and sour cream here, and it works surprisingly well. Why spend time making a complicated taco salad dressing when these will do? When you mix them all together, it tastes like there’s dressing in them. To make it dairy-free, use thick coconut cream, a splash of lime juice, and a pinch of salt instead of sour cream.

how much ground beef per person for taco salad

Easy Taco Salad Bowls Recipe: Crispy, Fresh, and Delicious!

FAQ

How much taco meat do you need per person?

The most important thing when planning and prepping is to purchase enough ingredients. For instance, plan for about 3-4 ounces of ground beef taco meat per person, which means a pound of ground beef can feed roughly four people.

What is a serving size of taco salad?

Nutrition Facts
Serving Size 2 cups (401g)
6 servings per container
Cholesterol 55mg
18%
Sodium 710mg
31%
Total Carbohydrate 30g
11%

How many tacos will 1lb of meat make?

How much ground beef per taco? Each taco shell or small soft taco-size tortilla fits about 2 ounces or 1/4 cup of meat. If you add diced onions, you could stretch a pound of ground beef to make about a dozen tacos. With just the meat and spices, you can make about 8 tacos from a pound of meat.

How much shredded lettuce for tacos for 50 people?

2 or 3 pounds of shredded lettuce, and 15 or more tomatoes. 5 – 10 lbs of shredded cheese; remember you will probably be topping beans with it, if you have beans as a side dish. I won’t recommend a recipe, because I really don’t have a favorite. I use McCormick’s seasoning, usually.

How many tacos should a pound of ground beef fill?

It is based on a formula that uses the average serving of protein on the typical taco is an 1/8th of a pound of meat, which is about 2 ounces of beef before it is cooked. So, a pound of ground beef should nicely fill 8 tacos. Of course, once the hamburger meat is cooked, it will weigh less than the raw and it will also shrink in size a bit.

How much ground beef do you need for a Taco Party?

So, a pound of ground beef should nicely fill 8 tacos. Of course, once the hamburger meat is cooked, it will weigh less than the raw and it will also shrink in size a bit. But, as long as you use the calculator, you will have the proper amount of hamburger meat for your taco party.

How do you make a layered taco salad?

Here’s how the layered taco salad recipe comes together: Brown ground beef with a red bell pepper. Add refried beans and taco seasoning to the beef mixture before turning out over a base of chips. Sprinkle the beef and bean mixture with cheese, lettuce, more cheese, crushed chips, tomatoes, and dig in! Can I Use Ground Turkey Instead of Beef? Sure!

How do you make a healthy Taco Sandwich?

In a small bowl, combine the salad dressing, salsa, sugar and remaining taco seasoning; pour over salad and toss to coat. Using lean ground beef in the meat loaf instead of beef that’s 80% lean saves 45 calories per 4-ounce serving of beef. Lean ground beef is also 29% lower in saturated fat.

Leave a Comment